Cement Products
General Range
Concrete Blend
Our concrete blend is mix of 10mm aggregate and washed sand. Just add cement.
The ratio for 25mpa concrete is approx 14 bags of cement to 1m³ of concrete blend.
If you need stronger concrete you can ask to add additional aggregate and use up to 17 bags of cement per 1m³.
$77m³
Cements, Concrete Mixes and Additives
We stock Cement Australia cements, concrete mixes and additives. These products are made in Australia to Australian standards unlike brands such as Bastion.
GP Cement
20Kg
$
8
50
General Purpose cement is a cost effective, high quality cement suitable for construction applications. Approx 13-17 bags of cement to 1m³ of concrete blend depending on required mpa.
Builders Cement
20Kg
$
8
00
Manufactured for use in general concreting where the use of fly ash or slag has been approved. Fly ash improves workability but typically results in lower initial strength.
Concrete Mix
20Kg
$
11
00
Quality blend of cement, sand and aggregate. This product is made in Australia to Australian Standards.
Rapid Set Concrete
20Kg
$
11
50
Specially formulated to harden quickly so you can complete a job faster. Ideally suited to setting fence posts, letterboxes, non load bearing posts and other non-structural uses.
Post Set Concrete
20Kg
$
10
50
A proportioned blend of cement, sand and aggregate, ideally suited for stabilising non-structural posts including fence posts, letter boxes and clothes lines.
Trade Mortar
20Kg
$
12
00
A pre-blended M4 bricklaying mortar mix conforming to Australian Standards. It is suitable for laying bricks, masonry blocks, stonework and general purpose mortar applications.
Pure White Cement
20Kg
$
19
50
Ideal for applications requiring a decorative finish. It eliminates the addition of white oxide for use in grouts and renders where a premium whiteness has to be achieved.
Off White Cement
20Kg
$
15
50
Off White Cement is ideal for high early strength applications and provides a lighter colour finish.
Hydrated Lime
20Kg
$
14
50
Hydrated lime can be blended with sand and cement to enhance the workability and bond strength for mortars and renders.
Dried Sand
20Kg
$
10
60
Designed for filling gaps in all types of brick and block paving, or blending further with cement and aggregates for consistent mortar and concrete mixes. Covers approx 3.5m2 per 20kg bag (3mm gap, brick shaped pavers).
Clay
20Kg
$
22
50
A finely milled, air separated clay used as a plasticiser in mortar and render applications where sands are low in clay content. The product can be used as a general purpose filler.
Plasticiser
1L
$
27
00
Brickies’ Own is a concentrated plasticiser that enhances mortar properties.
It is suitable for mortars made on all colours of sand, including white sand.